Skip Navigation Links.

SHOP HOURS

Tuesday- 9am to 6pm

Wednesday-9am to 8:30pm

Thursday- 9am to 6pm

Friday- 9am to 6pm

Saturday- 9am to 1:30pm

 

(317) 821-1548

(800) 705-1285

 

 

MVP Authorized Dealer
MVP Authorized Dealer

bfgoodrich_rgb.jpg

conti_2_rgb.jpg

general_2_rgb.jpg

hankook_logo.gif

max_left_logo.gif

logo_michelin.gif

logo_pirelli.gif

logo_yokohama.gif

_ShowItem_Top.htm
Performance Springs Chassis and Suspension : Lowering Springs
[MediumImageHyperLink]
Available: 20
Weight: 25.0 lbs
Manufacturer: Performance Driven LLC
1996 - 1999 Dodge Plymouth Neon Lowering Springs
Approximately 1" Drop 380# Front/276# Rear Take Your First Gen Neon To The Ultimate Level Of . These Springs Provide The Proper Balance And Handling
Part # MOP XXHIGH set
List Price:  $271.29
Your Price:  $211.00
Quantity:





Application Notes
Take your Neon to the next level of performance! We took these to the max that would work with Koni's. According to Koni these will work with their stock sport struts, but the life will be shortened. It is highly recommended for optimum performance that you use revalved struts. At the same time, we have eliminated some of the design defects found with the Mopar springs.
380# rate Front 1"/276# rate Rear/1" drop
Please note the front springs in the picture are actually upside down.
These spring are recommended to be used with Koni struts. Revalved Koni's will even further enhance the overall performance.
As with all lowering springs the factory bump stops should be maintained to prevent damaging the struts.
These are the springs used by many of the top autocross Neons in the nation.  Here is what James Kidd had to say about the performance of our springs.  James uses our springs on both of his Neons.
“Overall it's been a pretty decent couple of weekends. Last weekend Sean and Jessie ran the SCCA Fingerlakes ProSolo in Central New York. Sean and "The Grape" placed in 6th out of 19 cars in the STS class, which was the final trophy spot. As usual he was beat out by a bunch of Civic Si's, but he beat some of them -AND- he beat Mike Occhipinti in Derek Wyman's '96 ACR with their big $$$ coil-overs. Admittedly, Mike was autocross rusty in that he has been spending all of his free time (and money) on his dirt track midget car, but ... unofficially, we now have the fastest STS class Neon in the country!”





Special Notes
Made with experience & expertise. Our suspension components are designed and manufactured for us with over 65 years of experience and respected talent, our design team makes outstanding suspension applications. Many of our springs are exclusive to Performance Driven LLC in rate and drop, designed to optimize performance. made of superior materials. Our manufaturer uses only the highest quality spring steel. The material is usually chrome silicon, selected for its strength and light weight. The springs are powder coated to provide an extremely durable and attractive finish. Manufactured with precision. Our springs are coiled to strict specifications and stress-relieve in a continuous oven. Then the edges areground smooth, shot peen, 100% set-remove and powder coat the springs to maximize performance and fatigue life. High tech equipment is used to test the preproduction and production runs of every spring application built. Testing includes inspection for load height as well as rate. (Many of the springs are made with variable rate.) Built to last. Our springs are designed to give the specified drop or lift from original factory ride height for life and are covered by our No Sag Guarantee. Limited Lifetime Warranty All Performance Driven LLC products have a Limited Lifetime Warranty. Performance Driven LLC warrants its suspension products to the original retail purchaser against defects in material, workmanship, and wear-out when used on vehicles for which they are designed and under normal operating conditions. This warranty does not apply to a) parts which are modified or altered, improperly installed or installed on vehicles for which they were not designed, subjected to misuse, negligence, or vehicular or other accident(s); b) vehicles lowered more than 2"; c) retail purchasers outside Canada and the United States. Performance Driven LLC obligation under this warranty is limited to the repair or replacement of the defective or worn-out products covered by this warranty. Performance Driven LLC has no obligation to bear any costs of removal or installation, and will not be liable for any special, incidental or consequential damages. No Sag Guarantee Performance Driven LLC springs have a 100% Ride Height and No Sag or Set Guarantee when installed on vehicle. Note there is a possibility of some initial vehicle settling as springs seat in pockets. Ride height can very depending on other modifications done to the vehicle.




Applications
MakeModelEngine TypeLiterYearsFuelCIDFuel Delivery
DodgeNeonL42.01995 - 1999GAS1996FI
DodgeNeon HighlineL42.01995 - 1997GAS1996FI
DodgeNeon SportL42.01995 - 1997GAS1996FI
PlymouthNeonL42.01995 - 1999GAS1996FI
PlymouthNeon HighlineL42.01995 - 1997GAS1996FI
PlymouthNeon SportL42.01995 - 1996GAS1996FI
_ShowItem_Bottom.htm
Weekly Specials
Chrysler Specials
Ford Specials
GM Specials
Honda Specials
Mazda Specials
Mitsubishi Specials
Subaru Specials
Other Makes

DIRECTIONS:

From I-465 @ Kentucky Ave.-

A) Go north on Kentucky one block to Hanna Ave. Left on Hanna, left on Kolman, first building complex on the right across from the Decatur Township Garage and MacDonald Machinery. (This is the quickest way)

B) Go south on Kentucky Ave to Heathrow Way. Turn right on Heathrow, turn right on Decatur Blvd. Follow Decatur north past the FedEx depot around the bend. Last building complex on the left across from the Decatur Township Garage and MacDonald Machinery. (This is the smoothest way)

Links

Customer's Vehicles

lou.JPG

Indianapolis Region SCCA

 

scca.gif

IzysLgoSm.jpg

 

 

Home / Catalog / Newsletters / FAQ / Classified Ads / Contact Us / About Us / Privacy Statement